Boat and Marine Washing in Nashville and Middle Tennessee
Industrial, Fleet and Equipment Washing

Boat and Marine Washing

Washing for boats, trailers, docks and lift equipment that removes algae, scum lines and road film using marine-safe products.

Boats and lake gear live in water and road dirt. Hulls collect scum lines and algae, trailers get splashed by roads and ramps and docks and lifts grow slick. Boat owners around Nashville, Hendersonville and Gallatin call us to wash boats, trailers and marine surfaces so equipment looks good, runs clean and stays safer to handle at the ramp.

We start with a Free Estimate and talk about the boat type, material, storage location and any coatings or covers. We rinse with low to moderate pressure, apply marine-safe soap or algae cleaner, brush hulls, decks and trailers and rinse thoroughly. We avoid harsh chemicals near the water and protect vinyl, canvas and electronics. We tell you about corrosion, damaged trailer parts or worn hardware that a marine technician should check. Boats are often stored on trailers at home, in covered racks or at a marina. We can wash at the place that suits you, with access to water and a firm surface for our equipment. We pay attention to the waterline, where scum collects, and to trailer bunks and rollers, where grime builds up. For boats that need polishing or bottom work, we suggest a marine detailer and keep the surface clean until they arrive.

Marine-safe products

We choose cleaners that suit gelcoat, aluminum, canvas and vinyl.

Water-aware

We manage runoff and avoid harsh products near lakes and ramps.

Trailers and lifts included

Road film and rust on trailers and lifts are cleaned with the boat.

Condition notes

We report corrosion and worn parts we see.

What is included

  • Boat and storage assessment
  • Rinse and protect
  • Marine-safe cleaner
  • Brush and rinse
  • Spot-free drying
  • Condition notes
Why it works

What you get with Boat and Marine Washing

Assess boat and storage

Material and location noted.

Rinse and protect

Canvas and electronics shielded.

Apply marine-safe cleaner

Soap or algae treatment.

Brush and rinse

Hull, deck and trailer.

Dry

Spot-free finish.

Notes

Condition findings shared.

Try it now

Pressure Washing Area and Materials Calculator

Enter your measurements to see area, water, solution, sealer and time to plan for houses, flatwork, decks, fences and roofs.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you see or what you want cleaned, and we set a visit that fits your day.

  2. 02

    Inspect and measure

    We walk the property, identify surfaces and stains, measure and talk through your goals.

  3. 03

    Plan and approve

    You receive a plain written scope with methods, inclusions and price before anything begins.

  4. 04

    Protect and prepare

    We cover or pre-wet plants, shield outlets and set up hoses, cones and runoff control.

  5. 05

    Wash and rinse

    We wash top to bottom with the right method for each surface and rinse thoroughly.

  6. 06

    Walk through and review

    We walk the property with you, share photos and give aftercare tips.

Questions

Boat and Marine Washing FAQ

Is it safe for gelcoat?

Yes. We use marine-safe products and gentle methods.

Can you clean a boat at the ramp?

We prefer your storage location or home, and we follow local rules at ramps.

Do you wash trailers?

Yes, including rust staining.

Will cleaning remove scum lines?

Usually, with the right cleaner.

Can you wash pontoons?

Yes, including decks and tubes.

Next step

Get your Free Estimate for Boat and Marine Washing.

Tell us about your property and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your property

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate