
Cleaning for brick, stone and masonry that removes algae, soot, dirt and stains while protecting mortar and the natural face of the material.
Brick and stone give Nashville homes their character, and they hold dirt in every pore and joint. Green growth on shaded walls, gray dust near the ground and dark streaks below windows all age a masonry home. The risk is cleaning too hard: aggressive pressure can eat mortar and scar soft brick, so careful method matters as much as clean results.
We begin with a Free Estimate and a close look at the masonry type, the condition of the mortar, any sealer already on the surface and the kind of soiling. We test a small area, then clean with a low-pressure rinse and a solution matched to the material, working in sections and rinsing well. We avoid pointing the spray directly into joints, and we tell you if repointing or sealing should be considered afterward. Older masonry often has soft mortar and porous brick that absorb cleaning solution and water. We keep that in mind by cleaning in smaller sections, rinsing thoroughly and not over-wetting walls close to windows and vents. If you have painted brick, tell us, because paint changes what is safe. We are happy to explain what we see in the mortar and what a mason might suggest before a deeper clean.
Pressure is kept low and angled so joints are not washed out.
We try a small hidden section so you see the result before the whole wall is cleaned.
Brick, limestone and manufactured stone react differently, and we choose accordingly.
If mortar is crumbling or sealing would help, we tell you plainly.
Drag the handle to compare.

BeforeAfterType, joints and soiling noted.
Method confirmed on a hidden spot.
Landscaping and windows shielded.
Low-pressure solution and rinse.
Stains and edges addressed.
Next steps discussed.
Every topic has its own page with what to expect and how we approach it.
ResourceJames HardieA maker of fiber cement siding and trim with maintenance and cleaning information for homeowners.Learn more
ResourceLP SmartSideA maker of engineered wood siding and trim with maintenance guidance for homeowners.Learn more
ResourceBrick Industry AssociationA trade association for the brick industry that publishes technical notes and homeowner information about brick, mortar and…Learn more Pick what you see on your siding, concrete, wood or roof to get likely causes, what to try first and the service page that fits.
You tell us what you see or what you want cleaned, and we set a visit that fits your day.
We walk the property, identify surfaces and stains, measure and talk through your goals.
You receive a plain written scope with methods, inclusions and price before anything begins.
We cover or pre-wet plants, shield outlets and set up hoses, cones and runoff control.
We wash top to bottom with the right method for each surface and rinse thoroughly.
We walk the property with you, share photos and give aftercare tips.
It can if done carelessly. We use low pressure and gentle solutions and avoid blasting mortar joints.
White deposits can be efflorescence, which needs a specific treatment we can explain.
Sometimes, to slow water absorption. We discuss whether it fits your masonry.
Yes, with methods suited to each type.
Every few years is common, and shaded walls may need it sooner.
Efflorescence RemovalTreatment for white powdery mineral deposits on brick, block, pavers and concrete using masonry-safe cleaners and rinsing.Explore
Masonry Sealing and Water RepellentApplication of breathable water repellents to brick, stone and block that helps slow water absorption, staining and growth.Explore
Chimney and Masonry Exterior CleaningExterior cleaning for chimneys, flues and masonry stacks that removes soot streaks, algae and stains from brick and…Explore
Retaining Wall CleaningCleaning for block, stone and concrete retaining walls that lifts moss, algae, dirt and efflorescence without loosening the…Explore Tell us about your property and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.