
Application of breathable water repellents to brick, stone and block that helps slow water absorption, staining and growth.
Brick, stone and block are tough, and they are also porous. Water soaks in, carries minerals and dirt with it and feeds algae and freeze-thaw wear. Owners in Nashville with older brick, retaining walls and stone veneer ask us to apply a breathable water repellent after cleaning, to help slow absorption and staining while still letting moisture vapor escape from the wall.
We begin with a Free Estimate and examine the masonry for cracks, open mortar, efflorescence and existing coatings. We clean the surface, allow it to dry thoroughly, repair or note defects, then apply a breathable penetrating water repellent with a low-pressure sprayer, working to the manufacturer instructions and weather limits. We protect windows, plants and adjoining surfaces, explain cure time and tell you why film-forming coatings can trap moisture in some walls. Not every wall needs a repellent. If moisture is coming from the inside, from a leaking gutter or from the ground, treating the surface will not solve it. We look at the full picture before recommending a product and are glad to refer you to a mason or waterproofing specialist when the cause is structural or involves failed mortar.
Penetrating repellents slow water while letting vapor escape.
Cleaning, drying and repair come first so the product can do its job.
We explain when sealing helps and when it does not.
Product, coverage and weather limits are followed.
Mortar, cracks and coatings noted.
Surface prepared thoroughly.
Open joints noted.
Low-pressure sprayer coverage.
Windows and plants covered.
Timing and advice shared.
Every topic has its own page with what to expect and how we approach it.
ResourceTechnisealA maker of joint sand, sealers and cleaners for pavers and natural stone.Learn more
ResourceSherwin-WilliamsA paint and coatings company that offers exterior paints, stains and sealers along with surface preparation guidance.Learn more
ResourceCabotA maker of exterior wood stains and finishes for decks, siding and fences.Learn more Pick a washing, cleaning or sealing job, set the size and add extras to see a ballpark planning range. Placeholder values only.
You tell us what you see or what you want cleaned, and we set a visit that fits your day.
We walk the property, identify surfaces and stains, measure and talk through your goals.
You receive a plain written scope with methods, inclusions and price before anything begins.
We cover or pre-wet plants, shield outlets and set up hoses, cones and runoff control.
We wash top to bottom with the right method for each surface and rinse thoroughly.
We walk the property with you, share photos and give aftercare tips.
A breathable water repellent allows vapor to escape. Film-forming coatings can trap moisture.
Penetrating products usually change it little, and we test a small area.
It varies with the product, exposure and surface, often several years.
After. A clean, dry surface is important.
It helps with absorption, though cracks and failed mortar need repair.
Brick and Stone CleaningCleaning for brick, stone and masonry that removes algae, soot, dirt and stains while protecting mortar and the…Explore
Efflorescence RemovalTreatment for white powdery mineral deposits on brick, block, pavers and concrete using masonry-safe cleaners and rinsing.Explore
Retaining Wall CleaningCleaning for block, stone and concrete retaining walls that lifts moss, algae, dirt and efflorescence without loosening the…Explore
Concrete SealingCleaning and sealing for driveways, patios and walkways with penetrating or film-forming sealers that slow staining, moisture and…Explore Tell us about your property and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.