
Cleaning, joint sand replacement and sealing for pavers that stabilizes joints, enriches color and slows weeds and staining.
A paver surface is only as good as its joints. When the sand washes out, stones shift, weeds sprout and ants move in, and the surface loses its color and character. Owners in Nashville ask us to clean pavers, refill the joints with polymeric sand and seal the surface so it looks rich, stays locked together and is easier to keep clean through the seasons.
We begin with a Free Estimate and inspect pavers for settling, loose stones, weeds and old sealer. We clean thoroughly, let the surface dry, refill joints with polymeric sand, compact and sweep, activate the sand with a fine mist and apply a paver sealer with a sprayer or roller. We explain cure times, tell you about any areas that need a paver specialist to reset and give care tips for years ahead. Polymeric sand needs the right moisture to activate, which means too much water washes it out and too little leaves it loose. We use a controlled mist and follow the product instructions on dry time, and we avoid sanding when rain is likely. We always sweep the surface clean of residue before activating, because stray sand on the stones can leave a hazy film that is hard to remove later.
Fresh polymeric sand locks pavers together and discourages weeds and insects.
A sealer can deepen the tone and protect against stains.
Clean, dry, sand, activate, then seal gives the best results.
We point out sunken or loose areas that need resetting.
Movement, sand and sealer noted.
Growth and dirt removed.
Surface allowed to dry.
Polymeric sand placed and compacted.
Mist and sealer applied.
Cure and care guidance shared.
Every topic has its own page with what to expect and how we approach it.
Comparison guideWood Restoration StepsThe steps from gray, weathered wood to a protected finish: cleaning, stripping, brightening, drying, repair and staining or…Learn more
Comparison guidePaver Cleaning and SealingHow pavers are cleaned, why joint sand matters and what sealers do, with the steps in the right…Learn more
ResourceSeal-KreteA maker of sealers, coatings and cleaners for concrete, masonry and pool decks.Learn more Pick the project and options to see a typical sequence from estimate and prep to washing, drying, sealing and cleanup.
You tell us what you see or what you want cleaned, and we set a visit that fits your day.
We walk the property, identify surfaces and stains, measure and talk through your goals.
You receive a plain written scope with methods, inclusions and price before anything begins.
We cover or pre-wet plants, shield outlets and set up hoses, cones and runoff control.
We wash top to bottom with the right method for each surface and rinse thoroughly.
We walk the property with you, share photos and give aftercare tips.
Fresh sand holds pavers in place and helps stop weeds and insects.
A sand mix with binders that harden slightly when activated with water.
It can deepen it, and some sealers add sheen. We show options.
Polymeric sand and sealer need cure time, and we give specifics.
We note them and suggest a paver specialist for resetting.
Paver CleaningCleaning for brick, concrete and stone pavers that lifts moss, algae, dirt and stains while protecting joint sand…Explore
Concrete SealingCleaning and sealing for driveways, patios and walkways with penetrating or film-forming sealers that slow staining, moisture and…Explore
Patio CleaningCleaning for concrete, paver and stone patios that removes green growth, grease, furniture marks and winter grime before…Explore
Masonry Sealing and Water RepellentApplication of breathable water repellents to brick, stone and block that helps slow water absorption, staining and growth.Explore Tell us about your property and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.