Paint and Stain Stripping in Nashville and Middle Tennessee
Sealing, Staining and Restoration

Paint and Stain Stripping

Removal of old stain, sealer and loose paint from decks, fences, railings and siding to prepare wood for a fresh finish.

When stain peels, flakes or goes blotchy, adding more on top only hides the problem for a season. The new finish will not bond to the failing layer. Owners in Nashville ask us to strip old stain and paint from decks, fences, railings and siding so the wood is ready to take a fresh finish that will last, and they want it done without gouging or burning the grain.

We begin with a Free Estimate and identify the existing finish, wood condition and what you plan to apply next. We protect plants and nearby surfaces, apply a stripper suited to the finish, allow dwell time, agitate with brushes or a controlled pressure rinse and neutralize the wood. We note any sanding needed, discuss drying time and, on homes built before 1978, follow lead-safe practices and tell you what we see in painted surfaces. Stripping is the step many people want to skip, and it is also the step that decides how long the new finish lasts. We explain the process, expected drying time and what the wood will look like when it is bare, because it can look rough before it looks beautiful. Once the surface is stripped, brightened and dry, new stain goes on evenly and lasts.

Right stripper for the finish

Stains, sealers and paint each need different products and dwell times.

Controlled removal

Brushes and fan tips remove the finish without tearing the grain.

Neutralized and ready

We rinse and neutralize so the new finish can bond.

Lead-safe awareness

Older painted surfaces get extra care.

What is included

  • Finish and wood identification
  • Surroundings protected
  • Stripper application
  • Agitation and rinse
  • Neutralizing
  • Finish planning
Why it works

What you get with Paint and Stain Stripping

Identify finish and wood

Existing coating and condition noted.

Protect surroundings

Plants and surfaces shielded.

Apply stripper

Product placed and given dwell time.

Agitate and rinse

Brushes and controlled rinse.

Neutralize

Wood prepared.

Review

Sanding and finishing steps discussed.

Try it now

Pressure Washing Project Timeline Planner

Pick the project and options to see a typical sequence from estimate and prep to washing, drying, sealing and cleanup.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you see or what you want cleaned, and we set a visit that fits your day.

  2. 02

    Inspect and measure

    We walk the property, identify surfaces and stains, measure and talk through your goals.

  3. 03

    Plan and approve

    You receive a plain written scope with methods, inclusions and price before anything begins.

  4. 04

    Protect and prepare

    We cover or pre-wet plants, shield outlets and set up hoses, cones and runoff control.

  5. 05

    Wash and rinse

    We wash top to bottom with the right method for each surface and rinse thoroughly.

  6. 06

    Walk through and review

    We walk the property with you, share photos and give aftercare tips.

Questions

Paint and Stain Stripping FAQ

Why strip instead of recoat?

New finishes often fail when applied over peeling or failing layers.

Will stripping damage the wood?

Done carefully it does not, and we use gentle agitation.

Is stripping safe for plants?

We protect and rinse plants thoroughly.

What about lead paint?

Homes built before 1978 may have it, and we use lead-safe practices.

How long before restaining?

Wood must be dry, and we give a timeline.

Next step

Get your Free Estimate for Paint and Stain Stripping.

Tell us about your property and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your property

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate