Stain Guide: Oil, Rust, Mildew and Other Exterior Stains
Resource guide | 7 min read

Stain Guide: Oil, Rust, Mildew and Other Exterior Stains

How to identify common exterior stains such as oil, rust, algae, tannin, paint and sap, and how each is treated.

Oil and grease

Dark spots that darken when wet are usually oil. Degreasers and sometimes heat lift them.

Old stains may fade without disappearing.

Drip pans and sealers prevent repeats.

Take a close photo and note where the stain is and what could have caused it. Send it to us before the visit, and we will suggest what to expect. A quick photo saves time.

Rust

Orange or brown streaks come from iron in water, fasteners and metal. Acid-based treatments dissolve them.

Fix the source, such as a sprinkler or leaky fixture.

Never use bleach on rust, because it can set the stain.

Avoid scrubbing with a wire brush, which can scar concrete and siding. A soft brush and mild soap are safe until a professional treats the stain.

Algae and mildew

Green films and black speckles on damp surfaces are living growth. Soft wash solutions remove them.

They return in shade and damp spots.

Trimming and drainage help.

Keep a log of when stains appear. If they follow a storm, a sprinkler cycle or a vehicle, you may find the source and stop it. Prevention is cheaper than cleaning.

Tannin and leaf stains

Brown or tan blotches under trees come from leaves. Detergents and dwell time lift most.

Sealing slows them.

Sweep leaves before they soak in.

Rake and sweep leaves from patios and walkways in fall. Tannin stains form when wet leaves sit for days, and prompt cleanup prevents most of them.

Paint, graffiti and sap

Paint and marker need removers suited to the surface. Sap needs a solvent.

Test first on delicate finishes.

Fresh marks come off more easily.

For graffiti or paint, call quickly. Fresh paint is easier to remove, and we can protect the surface while we work. Do not scrub it with abrasives.

Hard water and efflorescence

White crust and chalky deposits are minerals. Mild acid treatments dissolve them.

Efflorescence signals moisture in masonry.

Fix the water source to keep it from returning.

Check gutters and grading if white deposits keep returning on brick. They point to water moving through the wall, and fixing that is the lasting solution.

Our advice in one sentence

Identify the stain before you treat it, test first and fix the source so it does not come back.

Questions

Quick answers.

How do I tell what stain I have?

Color, location and feel give clues, and a photo helps us advise.

Can I use bleach on everything?

No. Different stains need different products, and bleach can set rust.

Will stains come back?

They can if the source remains, so we help you find it.

Free Estimate

Ready for an exterior that looks cared for again?

Call us and describe your property. We will look at the surfaces, talk through options and give you a clear written estimate.

Call NowFree Estimate