Hot Water Degreasing in Nashville and Middle Tennessee
Industrial, Fleet and Equipment Washing

Hot Water Degreasing

Hot water and degreaser cleaning for heavy grease on concrete, equipment pads, kitchens exteriors, shops and industrial surfaces.

Some grease laughs at cold water. It sits in the pores of concrete, in the folds of machinery and on kitchen exhaust pads, and only heat and the right chemistry will move it. Shops, restaurants, farms and plants in Nashville call us for hot water degreasing because it is the difference between a surface that looks clean for a day and one that is genuinely clean.

We start with a Free Estimate and identify the grease type, the surface and where wastewater can go. We apply a degreaser suited to the soil, let it dwell, wash with a hot water pressure washer or surface cleaner and rinse. Heavy buildup may take two passes. We use containment and recovery where required, and we tell you whether the surface will be fully clean or whether staining will remain after the grease is gone. Not every job needs hot water, and we say so when cold water will do. For heavy grease, burner-heated equipment gives the extra boost, and the right degreaser makes it far more effective. We also think about where the water goes. Grease should not reach storm drains, and we plan containment and recovery, so the cleanup solves a problem rather than moving it to someone else.

Heat plus chemistry

Hot water and the right degreaser break down grease that cold water leaves behind.

Soil-specific products

Cooking oil, motor oil and hydraulic fluid each respond to different degreasers.

Containment where needed

We manage wastewater according to rules and site conditions.

Honest results

We explain what will lift and what may leave a shadow.

What is included

  • Soil and surface identification
  • Wastewater plan
  • Degreaser application
  • Dwell time
  • Hot water wash
  • Result review
Why it works

What you get with Hot Water Degreasing

Identify soil and surface

Grease type and material noted.

Plan wastewater

Drainage or recovery set.

Apply degreaser

Product on the surface.

Dwell

Grease softens.

Hot water wash

Heat and pressure.

Review

Results and repeat needs discussed.

Try it now

Pressure Washing Project Timeline Planner

Pick the project and options to see a typical sequence from estimate and prep to washing, drying, sealing and cleanup.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us what you see or what you want cleaned, and we set a visit that fits your day.

  2. 02

    Inspect and measure

    We walk the property, identify surfaces and stains, measure and talk through your goals.

  3. 03

    Plan and approve

    You receive a plain written scope with methods, inclusions and price before anything begins.

  4. 04

    Protect and prepare

    We cover or pre-wet plants, shield outlets and set up hoses, cones and runoff control.

  5. 05

    Wash and rinse

    We wash top to bottom with the right method for each surface and rinse thoroughly.

  6. 06

    Walk through and review

    We walk the property with you, share photos and give aftercare tips.

Questions

Hot Water Degreasing FAQ

What is hot water degreasing?

It combines heat and a degreaser to remove heavy oil and grease from surfaces.

Can it remove old stains?

It can lift much of the grease, and stains may fade.

Is it safe for concrete?

Yes, with the right pressure and tools.

Do you recover wastewater?

Yes where required or requested.

When should I use hot water?

When grease is thick, sticky or baked on.

Next step

Get your Free Estimate for Hot Water Degreasing.

Tell us about your property and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your property

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate